Aastra MX-ONE_A700_MS Lync 2010 Quick Setup Guide Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 19
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
5 (19)
2.2 Direct SIP signalling overview
Aastra MX-ONE supports SIP/TCP or SIP/TLS as the SIP transport mechanism when connected with
Mediation Server.
The ports used for such connections are:
SIP/TCP: 5060
SIP/TLS: 5061
SI
P
/T
LS:
5067
Figure 3 - Solution integration Direct SIP signaling
2.3 Direct SIP supported features
During the certification process the following Lync features were validated with MX-ONE Telephony
Server software V.4.1 SP3.
Basic Call services between MX-ONE and Lync end-points over SIP trunks
Anonymous user calls
Caller ID on both sides
Decline call
Call forwarding and simultaneously ring feature
Inbound and outbound calls
Media bypass (a.k.a. direct media between MX-ONE and Lync clients). Encryption (TLS
and STRP) is required for this functionality.
Inbound call from MX-ONE user device to Lync client
Outbound call from Lync client to MX-ONE user device
Outbound call: Call Forward All (CFA) to another Lync client
Outbound call from Lync with by-pass enabled and CFA enabled to another Lync
user
Outbound call: PBX CFB (Call Forward on Busy) to another Lync user
Outbound call from Lync with by-pass enabled and CFB enabled to another Lync user
Conference
Failover (to secondary Lync gateway)
Security (support for TLS/SRTP encryption)
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 18 19

Comentarios a estos manuales

Sin comentarios