Aastra MX-ONE_A700_MS Lync 2010 Quick Setup Guide Manual de usuario descargar pdf (Pagina 14)

14 (19)

• Select the Encryption support level, in this case, Not supported

Figure 12 - Encryption support level

• Commit all changes

Now the setup is concluded, assign users with the Policy created previously and test the integration

making calls between the systems.

Please check Enable Users for Enterprise Voice setup in the link below:

http://technet.microsoft.com/en-us/lync/gg413011

4.2.2 Direct SIP with security and Media Bypass setup

The figure below shows the Direct SIP with security and Media Bypass configuration used in this

guide:

MX-ONE or A700 V.4.1 SP3

IP= 192.168.222.84

FQDN= mxone-lync.as.zr.zeruela.lab.se

PSTN / PLMN

or SIP operator

SIP Trunk

TLS

Lync Server and Mediation Server

IP= 192.168.222.90

FQDN= lync-stand.as.zr.zeruela.lab.se

Lync

Client

Microsoft® DC,AD, CA and DNS Server

IP= 192.168.222.45

FQDN= lync-infra.as.zr.zeruela.lab.se

SIP Traffic: TCP or TLS

SIP Traffic: TLS

SRTP/RTCP Traffic

Figure 13 - Security and Media bypass detailed signaling

1) MX-ONE Direct SIP with security and Media Bypass setup

The following setup needs to be done in MX-ONE in order to configure Direct SIP with security

(encryption), please note that only SIP Route definitions are showed.

Note that MX-ONE FQDN needs to be properly defined in the DNS Server.

When using security an appropriate certificate needs to be installed in MX-ONE as well as the

encryption licenses.

Note that TLS/SRTP security is required for Media bypass functionality.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Aastra MX-ONE_A700_MS Lync 2010 Quick Setup Guide Manual de usuario Pagina 14