Aastra MX-ONE_A700_MS Lync 2010 Quick Setup Guide Manual de usuario descargar pdf (Pagina 15)

15 (19)

SIP Route definition

Define SIP route category:

ROCAI:ROU=98,SEL=7110000000000010,SIG=0111110000A0,TRAF=03151515,TRM=4,SERV=310000000

1,BCAP=001100;

Define SIP route data

#VARC d5=1 forced gateway

RODAI:ROU=98,TYPE=TL66,VARC=00001000,VARI=00000000, VARO=00000950;

Define SIP trunk data specific:

Outgoing traffic:

sip_route -set -route 98 -remoteport 5067 -protocol tls -uristring sip:[email protected]ruela.lab.se

-fromuri sip:?@mxone-lync.as.zr.zeruela.lab.se

Incoming traffic:

sip_route -set -route 98 -accept REMOTE_IP -match 192.168.222.90

Codec Filtering:

sip_route -set -route 98 -codecs PCMA,PCMU

Define the SIP Route equipment initiate

ROEQI:ROU=98,TRU=1-1;

Define external destination SIP route data

RODDI:ROU=98,DEST=98,ADC=0005000000000250000001010000,SRT=3;

Import the certificate to MX-ONE Telephony Server

Import the server certificate mx-one-certificate.pfx to MX-ONE Telephony Server. On the access

Server, for example, Telephony Server 1 runs the following command:

Certificate installation

Install the certificate in the Telephony Server 1:

cert_install_local mx-one-certificate.pfx

2) Lync configuration

In order to finalize the configuration between Aastra MX-ONE and Microsoft Lync Server 2010 the

following needs to be done:

Define PSTN Gateway in the Lync Server 2010 Topology Builder

Open Lync Server 2010, Topology Builder and define a PSTN gateway in the Mediation Server to be

used between Lync and MX-ONE.

• To define the PSTN gateway, expand Mediation pools, right click in the Mediation Server

to be used, choose Edit Properties

Figure 14 - Mediation pools

1 2 ... 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Aastra MX-ONE_A700_MS Lync 2010 Quick Setup Guide Manual de usuario Pagina 15