Aastra MX-ONE V4 with Exchange 2010 Quick Setup Guide Manual de usuario descargar pdf (Pagina 27)

Quick Setup Guide

Doc. No. ASE/MXO/PLM/ 0141/ EN Rev.C Date: 01.12.2011 27/34

4.2.3 Import the certificate to MX-ONE Telephony Server

Import the server certificate, in the example, sn3112.roadrunner.pfx to MX-ONE Telephony

Server accessing the Exchange 2010 UM. On the access Server, for example, Telephony

Server 1 run the command:

cert_install_local sn3112.roadrunner.pfx

4.2.4 MX-ONE configuration:

4.2.4.1 Creating SIP trunk with TLS

The following commands shall be executed in MX-ONE to configure a SIP Trunk with TLS, the

others commands are the same as in a TCP configuration.

Using TLS for SIP Direct

sip_route -set -route 55 -uristring sip:[email protected] -fromuri0

sip:[email protected].se –remoteport 50061 -protocol tls -

codecs PCMA

Inbound setting:

sip_route -set -route 55 -accept REMOTE_IP -match 192.168.222.97

Note that –accept REMOTE_IP will match the IP address send in the IPv4 source IP header.

media_encryption_enable –type route

4.2.5 Exchange 2010 Um Configuration

In order to setup TLS in Exchange 2010 UM the following shall be configured.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Aastra MX-ONE V4 with Exchange 2010 Quick Setup Guide Manual de usuario Pagina 27