Aastra ATP-CNX-040-01 Manual de usuario descargar pdf (Pagina 75)

Procedures

ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-21

Configuring the Aastra CNX

(cont’d)

Network configuration attributes continued

Note: You can enter up to four NTP servers in your network, and press <Enter>. For example:

NTP Server #1: [pool.ntp.org]: 192.167.2.11 ↵

NTP Server #2: [pool.ntp.org]: 192.167.2.12 ↵

NTP Server #3: [pool.ntp.org]: 0.0.0.0 ↵

NTP Server #4: [pool.ntp.org]: 0.0.0.0 ↵

You can enter up to four NTP servers. If you have less than four NTP servers, enter the IP

address(es) for the NTP servers that you have, and then enter 0.0.0.0 for the remaining NTP

entries.

If you do not have your own NTP server, and the Aastra CNX has Internet connectivity, you may use

the default server entry of pool.ntp.org.

Aastra Telecom strongly recommends the use of NTP servers, either your own or the default

servers. NTP servers avoid clock slippage and inconsistent conference start times on the Aastra

CNX. However, you may completely disable the NTP server feature by setting the IP address of all

four servers to 0.0.0.0.

8 Click to save the configuration to the Aastra CNX and to the CompactFlash card.

Step Action

Attribute Default Valid Values/Description

NTP Server 1 <Current NTP

Server 1 address

of Aastra CNX>

Description: IP address of NTP server 1.

NTP Server 2 <Current NTP

Server 2 address

of Aastra CNX>

Description: IP address of NTP server 2.

NTP Server 3 <Current NTP

Server 3 address

of Aastra CNX>

Description: IP address of NTP server 3.

NTP Server 4 <Current NTP

Server 4 address

of Aastra CNX>

Description: IP address of NTP server 4.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 189 190

Sin comentarios

Aastra ATP-CNX-040-01 Manual de usuario Pagina 75