Aastra ATP-CNX-040-01 Manual de usuario descargar pdf (Pagina 30)

Configure the network settings

1-12 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07

CNX System Administrator Guide

Run network and time configuration

Use the following procedure to initially configure the network settings on the

Aastra CNX hardware.

Step Action

1 After first-time power up of the CNX, the following displays in a terminal window:

Welcome to the

Aastra CNX - Conference Bridge

Configuration Utility

- please press <enter> to continue -

2 Press <Enter>.

The following displays:

Hostname:

3 Enter the hostname for the Aastra CNX and press <Enter>. For example:

Hostname: cnx1 ↵

The following displays:

Configuring ENET #1...

IP Address:

4 Enter the IP address for the Ethernet port for which you want to use as a management interface, and

press <Enter>. For example:

IP Address: 192.168.2.6 ↵

The following displays:

Netmask:

5 Enter the Netmask for the Ethernet port for which you want to use as a management interface, and

press <Enter>. For example:

Netmask: 255.255.255.0 ↵

The following displays:

Default Gateway:

(continued)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 189 190

Sin comentarios

Aastra ATP-CNX-040-01 Manual de usuario Pagina 30