Aastra ATP-CNX-040-01 Manual de usuario descargar pdf (Pagina 63)

Overview

ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-9

Configuring the Aastra CNX

(5) Force reboot

This option allows you to manually force a reboot of the Aastra CNX.

Warning: Use caution when using the reboot option. If the Aastra CNX

is in use and you perform a reboot, all active conferences are aborted.

Note: If at any time during the initial configuration process, you want to

backout of the configuration, press <ESC> to cancel.

Step Action

1 At the Aastra CNX Main Menu, select option 4, and press <Enter>.

Welcome to the

Aastra CNX - Conference Bridge

Configuration Utility

1. Run network and time configuration

2. Change Telnet access

3. Set date and time

4. Configure Network Time Protocol (NTP)

5. Force reboot

Please select an option: 4↵

The following prompt displays:

Are you sure you want to reboot the Aastra CNX (y/n)?

Caution: Rebooting the Aastra CNX causes interruption in the services that the unit is providing.

Aastra Telecom recommends that only System Administrators reboot the Aastra CNX when required.

2 Enter “y” if you still want to reboot the Aastra CNX.

Enter “n” if you do not want to reboot the Aastra CNX.

After entering “y” at the prompt, the following displays:

The Aastra CNX is rebooting.....

Wait for the Aastra CNX to reboot before using the Aastra CNX Configuration Utility or the Aastra

CNX GUI.

3 You have successfully rebooted the Aastra CNX.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 189 190

Sin comentarios

Aastra ATP-CNX-040-01 Manual de usuario Pagina 63