Aastra ATP-CNX-040-01 Manual de usuario descargar pdf (Pagina 61)

Overview

ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-7

Configuring the Aastra CNX

(4) Configure Network Time Protocol (NTP)

This option allows you to modify the Network Time Protocol (NTP) that you set

during the “Run network and time configuration” procedure. Use the following

procedure to modify the NTP on the Aastra CNX.

Note: If at any time during the initial configuration process, you want to

backout of the configuration, press <ESC> to cancel.

Step Action

1 At the Aastra CNX Main Menu, select option 4, and press <Enter>.

Welcome to the

Aastra CNX - Conference Bridge

Configuration Utility

1. Run network and time configuration

2. Change Telnet access

3. Set date and time

4. Configure Network Time Protocol (NTP)

5. Force reboot

Please select an option: 4 ↵

The following message and prompts display:

Configuring Network Time Protocol (NTP)...

You can configure up to 4 NTP servers. To remove an existing

server, set it's address to 0.0.0.0. If no valid servers are

given then ntp will be disabled.

Do you want to continue (y/n) [n]:

2 Enter “y” to continue, and press <Enter>.

The following prompts display:

NTP Server #1: [pool.ntp.org]:

NTP Server #2: [pool.ntp.org]:

NTP Server #3: [pool.ntp.org]:

NTP Server #4: [pool.ntp.org]:

(continued)

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 189 190

Sin comentarios

Aastra ATP-CNX-040-01 Manual de usuario Pagina 61