Aastra ViPr system Install Guide EN Manual de usuario Pagina 3

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 2
ViPr™ Media Server
ViPr™ Media Servers (VMS1000) provide the ViPr™ system with
fully integrated broadcast video. ViPr™ Media Servers encode
video using a hardware-based H.264 codec, allowing for good
quality at low bandwidths.
Video channels can be viewed on any ViPr™ endpoint regardless
of the video source, though an individual users access level
will be dictated by the permission levels granted by the system
administrator. Each ViPr™ endpoint can display a combination
of conference participants and full-motion video feeds, or up to
three simultaneous video feeds when not in a conference. ViPr™
viewing options include the following:
Live broadcast video feeds, such as Fox News, CNN, and
MSNBC
Prerecorded video feeds, including DVD and VCR
Live and prerecorded security and surveillance video
PC-generated presentations, documents, and spreadsheets
Video sources can originate from a central location or from
multiple locations.
ViPr™ Unicast Audio Mixer
ViPr™ conference participants enjoy an unprecedented audio and
video experience.
With the ViPr™ Unicast Audio Mixer, non-ViPr™ voice-only callers
(those using traditional POTS/PSTN phones, mobile phones, or
SIP phones*) can also participate in point-to-point or multipoint
ViPr™ conferences.
The Unicast Audio Mixer enables seamless conferencing
functionality between ViPr™ endpoints and telephone users.
ViPr™ Media Interface
The ViPr™ Media Interface (VMI) provides additional exibility
for the ViPr™ solution. It provides encoding and decoding
capabilities for applications such as video recording, panel
conferences, and corporate-wide broadcasts.
The VMI user interface is optimized for specic applications. For
example, when using the VMI for recording purposes, conference
participants will receive a text notication that the conference
is being recorded. The VMI can also be congured to allow ViPr™
users to passively monitor a meeting or call. Passive conference
participants have the ability to dial into the conference as active
participants, if desired, to provide comments or take part in the
conversation.
Please contact your Aastra sales representative for additional
information about VMI capabilities, and for specic details about
VMI applications.
ViPr™ Telephony Gateways
A series of telephony gateways enables interconnection between
the ViPr™ system and various telephone systems (e.g., ISDN,
analog, and proprietary digital phone systems).
These gateways allow xed and mobile telephone users to
participate in point-to-point and multipoint ViPr™ calls. They also
enable existing voice mail systems to be integrated into the ViPr™
environment.
For detailed information about available ViPr™ Telephony
Gateways, please contact your Aastra sales representative.
Data summary
ViPr™ SIP<->H.323 Signaling Gateway and Unicast Audio Mixer
Dimensions H: 1.75 in. (4.5 cm); W: 19 in. (48.3 cm); D: 24.25 in. (61.5 cm);
rack mounting: rail-to-rail rack depths of 29 in. to 36 in. for rear bracket attachment
Environmental
Operating altitude
Operating humidity
Operating temperature
Storage altitude
Storage humidity
Storage temperature
0 to 10,000 ft (0 to 3,048 m)
20% to 85%
32° F to 95° F (0° C to 35° C)
0 to 30,000 ft (0 to 9,144 m)
5% to 85%
-40° F to +158° F (-40° C to +70° C)
Power
Cooling load (typical)
Input
720 BTUs/hour
Maximum: 120/220 VAC, 50/60 Hz, 6/3 A; typical: 120/220 VAC, 50/60 Hz, 2.5/1.25 A
Standards compliance
U.S.
Canada
Europe/UK
Japan
CFR 47 Part 15, Class A (FCC); UL 60950, 3rd Edition
CAN/CSA 22.2 #60950-00/UL 60950, 3rd Edition, DOC Class A
IEC60950 3rd Edition (1999); EN55024; EN55022 Class A (CE)
VCCI Class A
Weight 24 lbs (11 kg)
Vista de pagina 2
1 2 3 4

Comentarios a estos manuales

Sin comentarios